Electric Oil Extractor
Electric Oil Extractor
- No Jack, No Ramps Change Oil Standing Up
- A Quart a Minute 100W Motor, 2800 RPM
- Skip the Drain Plug Boats, Mowers, Jet Skis
- 30 Day Guarantee Shop With Confidence
Couldn't load pickup availability
Electric Oil Extractor
The Oil Change You Do Standing Up
Feed the thin inlet hose down your dipstick tube, clip the leads to your battery, and Drainless pulls the old oil straight up and out. No ramps, no jack stands, no drain pan sliding across the floor — and nothing running down your forearm.
A Quart a Minute, Start to Finish
A 100-watt copper-wound motor spinning at 2,800 RPM moves up to four quarts a minute, so a full crankcase is empty before you'd have finished jacking the car up. Warm the engine, flip the switch, and watch the oil climb the clear hose.
Built for the Engines With No Drain Plug
Boats, jet skis, ride-on mowers, generators — the machines where dropping the oil was never an option now change in minutes through the dipstick tube. It moves transmission and power-steering fluid just as happily, so you can stop pulling the pan every time.
Frequently Asked Questions
Will it work on my dent?
Will it work on my dent?
Built to handle a wide range of dents — including door dings, shopping-cart hits, parking bumps, broad panel dents, and shallow hail damage. Its pneumatic suction and controlled pulling force adapt to different dent sizes and panel areas, giving you a versatile tool for everyday auto-body repairs.
Do I need an air compressor?
Do I need an air compressor?
Yes — Aerova runs on the compressor in your garage. It connects with a standard 1/4" quick-connect fitting, and even a small pancake compressor has plenty of air for it. No compressor, no pull — that's the trade for real vacuum grip with no glue.
Will it damage my paint?
Will it damage my paint?
No glue, no drilling, no heat. The cup grips with pneumatic vacuum only, so your factory finish stays put. Clean the panel first so the rubber seals well, and release the valve before lifting the cup off.
Which panels does it work on?
Which panels does it work on?
Steel and aluminum body panels: doors, fenders, hoods, quarter panels, tailgates and roofs. It is not for plastic bumpers, trim, or glass — plastic flexes instead of holding a vacuum pull.
Do I need experience?
Do I need experience?
If you can hook up an air hose, you can use it. Connect, seal the cup over the dent, open the valve, and work the slide hammer with steady pulls. Most first-timers see their dent moving inside 60 seconds. Go slow and work from the shallow edge of the dent inward.
How does the Buy 1 Get 1 50% Off deal work?
How does the Buy 1 Get 1 50% Off deal work?
Pick the 2-pack option (or just set quantity to 2) and the 50% discount on the second unit applies automatically in your cart — no code to type. One for your garage, one for a friend's door ding emergency.
Return & Refund Policy
Return & Refund Policy
Yes! you may return the product within 30 days, Please go to the Contact page to follow instructions.
Shipping & Delivery
Shipping & Delivery
We offer free standard shipping on all U.S. orders. Orders are batched and processed once per week. After your order has been processed and handed to the carrier, packages typically leave our supplier within 1–2 business days and are delivered within 5–7 business days. All delivery times are estimates only and may vary based on your location, carrier volume, and seasonal demand.